Monday, 01 December 2025
Fluke Networks Pro3000 Analog Tone & Probe Kit
Fluke Networks Pro3000 Analog Tone & Probe Kit
Sends loud tone up to 10 miles (16 kilometers) on most cables, SmartTone technology provides five distinct tones for exact pair identification, Tone and trace wire on non-active networks, Angled bed-of-nails clips allow easy access to individual pairs, Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
SRP: ₱ 14,999
Pay only P 1,412 a Month for 12 months.
Or pay only P 2,674 a Month for 6 months.
- Installment promo is available for locally issued credit cards
- Card holder must transact inside an Asianic store to avail of the installment
Features
Use the SmartTone capability of the Pro3000 Analog Tone Generator to identify the right pair. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair. SmartTone provides five distinct tones for exact pair identification. Its ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.* Sends loud tone up to 10 miles (16 kilometers) on most cables
* SmartTone technology provides five distinct tones for exact pair identification
* Tone and trace wire on non-active networks
* Angled bed-of-nails clips allow easy access to individual pairs
* Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
* Line cord features angled bed-of-nails clips and ruggedized RJ-11 plug for direct access to phone and data jacks without adapters
* External switch allows selection of solid or alternating tone options, indi�cated with solid or flashing LEDs
* Continuity testing
* Line polarity confirmation
* Easy-to-use adjustable volume control dial
* �Quick-twist� tip for easy replacement
* Free spare tip inside Pro3000 Tone and Probe Kit
Technical
Specifications
| Pro3000 Analog Toner Specifications | |
| User interface | Slide switch selects Continuity or Tone ModePush button switch selects SOLID, ALT or OFFTone mode LEDContinuity/Polarity LED |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000/1500 Hz nominal |
| Over Voltage Protection | 60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode | 8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode | 8 Vdc with fresh battery |
| Battery | 9V alkaline |
| Temperature | Operating: -20˚ C to 60˚ C, Storage: -40˚ C to 70˚ C |
| Case dimensions | 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
| Pro3000 Analog Probe Specifications | |
| User interface | ON/OFF pushbuttonVolume dialReplaceable tip3.5 mm earphone jack |
| Battery | 9V alkaline |
| Temperature | Operating: -20˚ C to 60˚ C, Storage: -40˚ C to 70˚ C |
| Case dimensions | 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) |