80PLUS BRONZE
80PLUS Gold certified provide high energy efficiency up to 90%.
0 RPM
The fan keeps at zero rpm and won’t start spinning when the power supply is under 30% load or the temperature is below 25 degrees. During low power consumption, the fan delivers zero noise. The intelligent fan technology enables the fan keep the balance between cooling performance and noise level.
Modular Cable System
With modular cable system, you can connect only the cables you need to ensure a tidy and nice-looking case.
Fan Delay Cool
Fan Delay Cool Technology makes 140mm fan to work 15~30 seconds continually after power-off. In this way, the components inside will be cool down sufficiently so that they have a longer service time.
AC INPUT | VOLTAGE | CURRENT | FREQUENCY | ||
100-240V | 8.0A | 47-63Hz | |||
DC OUTPUT | +3.3V | +5V | +12V | -12V | +5VSB |
CURRENT(Max) | 18A | 16A | 38A | 0.3A | 2.5A |
OUTPUT(Max) | 110W | 456W | 3.6W | 12.5W | |
TOTAL OUTPUT | 500W |
Mainboard (24Pin) | EPS ATX12V (4+4Pin) | PCI-E (6+2Pin) |
1 | 1 | 2 |
SATA | Peripheral (Big 4Pin) | FDD (Small 4Pin) |
5 | 3 | 1 |
Model | DA500 |
Type | ATX 12V V2.31 |
Certifications | 80PLUS Bronze |
Dimension | 150×140×86mm (W x L x H) |
Output Capacity | 500W |
Input Voltage | 100~240V |
Input Current | 8A |
Input Frequency Range | 47~63Hz |
Fan Size | 120mm Blue LED |
PFC | Active PFC (>0.99) |
Power Good Signal | 100-500ms |
Hold Up Time | >16ms |
Efficiency | 85% Under Typical Load |
Protection | OCP / OVP / UVP / SCP / OPP / OTP |
Operation Temperature | 0~40°C |
Regulatory | CE / FCC / CCC / CB / EAC / TUV |
MTBF | 100,000 Hours |